Trying to get some clarity on how to Serb up my Atomiswave.
Trying to get some clarity on how to Serb up my Atomiswave.
I want the 480p 31khz signal. Now if I use a standard supergun with the board set to 480p, will that signal be carried through the jamma connection? And then I could use the RGB scart out on the Supergun or component out?
OR do I have to use the VGA out? If so, how do I use my super gun for power and controllers while using the VGA for video? Thanks!
OR do I have to use the VGA out? If so, how do I use my super gun for power and controllers while using the VGA for video? Thanks!
-
- Posts: 724
- Joined: Sat Oct 19, 2013 10:26 pm
- Location: Riverside, CA
Re: Trying to get some clarity on how to Serb up my Atomiswa
You can use the VGA connection on the Atomiswave. Just plug it into your monitor. Set the dipswitch for 31k.ClarkDV wrote:I want the 480p 31khz signal. Now if I use a standard supergun with the board set to 480p, will that signal be carried through the jamma connection? And then I could use the RGB scart out on the Supergun or component out?
OR do I have to use the VGA out? If so, how do I use my super gun for power and controllers while using the VGA for video? Thanks!
And use your supergun like normal, just don't plug the video cable into anything.
Re: Trying to get some clarity on how to Serb up my Atomiswa
Beautiful. Thanks a million!
-
maxtherabbit
- Posts: 1763
- Joined: Mon Mar 05, 2018 4:03 pm
Re: Trying to get some clarity on how to Serb up my Atomiswa
don't forget to wear your adidas while using it!
Re: Trying to get some clarity on how to Serb up my Atomiswa
Will do haha.
How do I take this signal to my PVM-20L5?
How do I take this signal to my PVM-20L5?
-
maxtherabbit
- Posts: 1763
- Joined: Mon Mar 05, 2018 4:03 pm
Re: Trying to get some clarity on how to Serb up my Atomiswa
just grab a VGA-BNC breakout cable - connect RGB to the monitor and use the H-Sync BNC plug as sync, just ignore the V-Sync BNC and let it hang looseClarkDV wrote:Will do haha.
How do I take this signal to my PVM-20L5?
Re: Trying to get some clarity on how to Serb up my Atomiswa
maxtherabbit wrote:just grab a VGA-BNC breakout cable - connect RGB to the monitor and use the H-Sync BNC plug as sync, just ignore the V-Sync BNC and let it hang looseClarkDV wrote:Will do haha.
How do I take this signal to my PVM-20L5?
Thanks! Gonna gather stuff for the setup I need soon then.
Re: Trying to get some clarity on how to Serb up my Atomiswa
One more question. Does audio come from the VGA output, or do I need to use my supergun to pull audio from the unit?
-
maxtherabbit
- Posts: 1763
- Joined: Mon Mar 05, 2018 4:03 pm
Re: Trying to get some clarity on how to Serb up my Atomiswa
you can get mono audio from the supergun IIRC, but there is a JST connector on the AW that has a stereo outputClarkDV wrote:One more question. Does audio come from the VGA output, or do I need to use my supergun to pull audio from the unit?
Re: Trying to get some clarity on how to Serb up my Atomiswa
Is this fine then? Or do I need a specific pin setup for Atomiswave JST connector. Sorry I’m new to this kinda thingmaxtherabbit wrote:you can get mono audio from the supergun IIRC, but there is a JST connector on the AW that has a stereo outputClarkDV wrote:One more question. Does audio come from the VGA output, or do I need to use my supergun to pull audio from the unit?
https://www.crutchfield.com/p_049TMRCA2 ... RCA2F.html
-
maxtherabbit
- Posts: 1763
- Joined: Mon Mar 05, 2018 4:03 pm
Re: Trying to get some clarity on how to Serb up my Atomiswa
that won't work, it is a specific pinout to the atomiswave and is also speaker level not line levelClarkDV wrote:Is this fine then? Or do I need a specific pin setup for Atomiswave JST connector. Sorry I’m new to this kinda thingmaxtherabbit wrote:you can get mono audio from the supergun IIRC, but there is a JST connector on the AW that has a stereo outputClarkDV wrote:One more question. Does audio come from the VGA output, or do I need to use my supergun to pull audio from the unit?
https://www.crutchfield.com/p_049TMRCA2 ... RCA2F.html
here's a thread with more info
https://www.arcade-projects.com/forums/ ... reo-cable/