I think I made a critical mistake today. Wiring up an RGB SCART cable to JP21 for my Saturn. It appears I wired the left and right audio to pins 2 and 6 instead of pins 1 and 5. Now, I have no sound output from the XRGB-2. Despite the last sentence, I have decent repair and troubleshooting abilities. How easy or difficult is this to fix? It does not appear the XRGB does anything with pins 2 and 6 as far as I can tell. Could I hardwire from the scart port to the audio out RCA jacks to fix this issue?
My apologies for the grave mistake. Video and and all else is still fine.
XRGB-2 No Sound
-
- Posts: 483
- Joined: Wed Jun 22, 2005 9:20 am
- Location: Liberal cesspool
XRGB-2 No Sound
A camel is a horse designed by a committee
-
- Posts: 483
- Joined: Wed Jun 22, 2005 9:20 am
- Location: Liberal cesspool
Re: XRGB-2 No Sound
Any help is appreciated. Curious what may have been damaged.
A camel is a horse designed by a committee
-
maxtherabbit
- Posts: 1763
- Joined: Mon Mar 05, 2018 4:03 pm
Re: XRGB-2 No Sound
I'd bet money that nothing is damaged - just switch the pins over to where they belong and carry on