NESRGB no mono audio
NESRGB no mono audio
I installed by NESRGB on my toploader but I am unable to get any audio. I have the audio out going to pin 11 in on the Nintendo multiport and still no sound. Is there something im missing or should be doing. Video is working fine just no audio. I did not connect any of the expansive audio.
-
Konsolkongen
- Posts: 2315
- Joined: Fri May 16, 2008 8:28 pm
- Location: Denmark
Re: NESRGB no mono audio
Did you connect the audio in pins in the NESRGB to the audio outputs on the CPU?
I would connect the audio to both pin 11 and 12 so you get the audio on both speakers in a stereo setup.
Remember to cut the traces going to pin 11 and 12 before you connect audio from the NESRGB, you don’t want it mixing with the stock audio
I would connect the audio to both pin 11 and 12 so you get the audio on both speakers in a stereo setup.
Remember to cut the traces going to pin 11 and 12 before you connect audio from the NESRGB, you don’t want it mixing with the stock audio
Re: NESRGB no mono audio
I did not connect the audio to the cpu pins. I thought that was only for expansive audio. ill connect them to cpu pins and see if it works. Thank you.
I plan to connect audio to both 11 and 12 but I can’t even get it to work on mono 11 pin.
I plan to connect audio to both 11 and 12 but I can’t even get it to work on mono 11 pin.