SNES White Line Jailbar FIX question help
-
- Posts: 168
- Joined: Wed Jul 01, 2015 9:11 am
SNES White Line Jailbar FIX question help
would it be fine to solder a 470uF cap to the voltage regulator that is 25v? or must it be 16v? I only have 25v on hand
Re: SNES White Line Jailbar FIX question help
That's fine. If anything its overkill
Re: SNES White Line Jailbar FIX question help
Additional reading here:
viewtopic.php?f=6&t=61072&hilit=snes+jailbar
viewtopic.php?f=6&t=61072&hilit=snes+jailbar
We apologise for the inconvenience
Re: SNES White Line Jailbar FIX question help
Quite simply put: You don't have to worry about using too high a voltage rating on caps. You can only get into trouble using too low a voltage rating.
-
- Posts: 168
- Joined: Wed Jul 01, 2015 9:11 am
Re: SNES White Line Jailbar FIX question help
thanks all i ended up using the 25v 470uf
i had a bit of problems (such as the SNES refusing to power on) yesterday. after re-doing it this morning I can see that there are no more annoying bright thick vertical white lines
i had a bit of problems (such as the SNES refusing to power on) yesterday. after re-doing it this morning I can see that there are no more annoying bright thick vertical white lines