Hi all,
I'm running my XBOX 360 in my Egret 29 cab (Nanao MS8) in 24k mode using an Ultracade UVC for video, and also in conjunction with a Lemony Vengeance 360 padhack. (old school setup, I acquired all this years ago!) All runs smooth, but I don't have a good audio solution.
I currently just run my RCA cables into headphones and just play that way, but I'd like to somehow run the audio into the cab speakers. What is the easiest way to achieve this? I know that I can always get computer speakers and just do it that way, but I am wondering if there is an easy way to utilize the speakers this cab already has (without removing its normal regular jamma audio capabilities).
Thanks all!
Best / easiest way to get audio from XBOX 360 onto my cab
-
mikehaggar
- Posts: 272
- Joined: Tue Jan 15, 2008 2:30 am
Best / easiest way to get audio from XBOX 360 onto my cab
Twitch: https://www.twitch.tv/djmikehaggar
Makaimura superplays (1 life clears!): https://www.youtube.com/playlist?list=P ... 62dgrlNU1w
Mr Driller superplays: https://www.youtube.com/playlist?list=P ... E3X3q9A7Wf
Makaimura superplays (1 life clears!): https://www.youtube.com/playlist?list=P ... 62dgrlNU1w
Mr Driller superplays: https://www.youtube.com/playlist?list=P ... E3X3q9A7Wf
-
- Posts: 1974
- Joined: Wed Jul 19, 2017 1:52 pm
Re: Best / easiest way to get audio from XBOX 360 onto my ca
Admittedly, I don't have much, if any, experience with arcade hardware; but, if your cab has an amp that gets fed line-level audio, would it make sense to splice in some RCA connections where line-level runs into the amp, which you can then disconnect from the normal audio source and connect the Xbox 360's RCA output?
-
mikehaggar
- Posts: 272
- Joined: Tue Jan 15, 2008 2:30 am
Re: Best / easiest way to get audio from XBOX 360 onto my ca
Thanks for the tip. Does anybody have any details about this, is this the best way?
Twitch: https://www.twitch.tv/djmikehaggar
Makaimura superplays (1 life clears!): https://www.youtube.com/playlist?list=P ... 62dgrlNU1w
Mr Driller superplays: https://www.youtube.com/playlist?list=P ... E3X3q9A7Wf
Makaimura superplays (1 life clears!): https://www.youtube.com/playlist?list=P ... 62dgrlNU1w
Mr Driller superplays: https://www.youtube.com/playlist?list=P ... E3X3q9A7Wf
-
EllertMichael
- Posts: 456
- Joined: Sat Dec 11, 2010 6:17 am
- Location: Boston
Re: Best / easiest way to get audio from XBOX 360 onto my ca
I use one of these:
Two Channel Auto Amplifier
You'll just need two female to female rca adapters to connect the 360's audio cables with the amp's built in cable, and some speaker wire to connect the cab's speakers to the amp.
Two Channel Auto Amplifier
You'll just need two female to female rca adapters to connect the 360's audio cables with the amp's built in cable, and some speaker wire to connect the cab's speakers to the amp.
-
mikehaggar
- Posts: 272
- Joined: Tue Jan 15, 2008 2:30 am
Re: Best / easiest way to get audio from XBOX 360 onto my ca
Cool! Will this require undoing the normal speaker wires already there / disabling pcb jamma audio going into the speakers? I'd love for both to be able to work without having to do anything major.
Twitch: https://www.twitch.tv/djmikehaggar
Makaimura superplays (1 life clears!): https://www.youtube.com/playlist?list=P ... 62dgrlNU1w
Mr Driller superplays: https://www.youtube.com/playlist?list=P ... E3X3q9A7Wf
Makaimura superplays (1 life clears!): https://www.youtube.com/playlist?list=P ... 62dgrlNU1w
Mr Driller superplays: https://www.youtube.com/playlist?list=P ... E3X3q9A7Wf