Hello all.
I have recently found a pair of Hantarex CT29 IDTV2 monitors that were going to be thrown away. These monitors can display signals from 15Khz up to SVGA and are quite something but I can't really find any documentation on them.
Here is a quick look at the back of the monitors :
The DB15 VGA input works great and playing Cave ports on my Xbox 360 on such a display is a dream come true !
The problem is that I would like to connect my 15Khz consoles (PS1/P2/MD/Snes) using the DB9 RGB input. I would like to use a female Scart to DB9 cable so that I can still use my scart RGB cables.
I first followed an advice given to another French dude who recently found a 34" unit and bought the following cable :
https://www.ebay.com/itm/PHILIPS-CM8833 ... xy3cJTglIw
I did not work and nothing appeared on screen. I then tested a PS1 S-video cable and I have a fine picture which meant that the monitors worked OK with low res.
Any idea ?
Thanks a lot
Issue using RGB DB9 input on Hantarex CT29 IDTV2 monitor
-
- Posts: 319
- Joined: Sat Mar 17, 2018 2:49 pm
- Location: Germany
Re: Issue using RGB DB9 input on Hantarex CT29 IDTV2 monitor
*Bump*
Have you ever got it to work?
Have you ever got it to work?
-
- Posts: 319
- Joined: Sat Mar 17, 2018 2:49 pm
- Location: Germany
Re: Issue using RGB DB9 input on Hantarex CT29 IDTV2 monitor
Okay, thank you for the response.
On Facebook, some french seller offered one of these including the adapter from ebay. But I have a suspicion that these are 31kHz only anyway.
On Facebook, some french seller offered one of these including the adapter from ebay. But I have a suspicion that these are 31kHz only anyway.
-
- Posts: 319
- Joined: Sat Mar 17, 2018 2:49 pm
- Location: Germany
Re: Issue using RGB DB9 input on Hantarex CT29 IDTV2 monitor
Haha, small world!
But it's unfortunate that these don't seem to accept 15kHz. There's always the OSSC I guess
But it's unfortunate that these don't seem to accept 15kHz. There's always the OSSC I guess