Hi all,
I just got Ibara PCB and a supergun 'Pana Twin' Running through a standard 21inch TV through RGB. The thing is it all comes up in just Black and Blue image ;( , does any of you guys know why this maybe????
BTW i tried my Raiden Fighters Jet board through the supergun and that worked just fine.
Thanks in advance to all help
mark
Ibara issues
-
the allett
- Posts: 265
- Joined: Sun Nov 13, 2005 8:34 pm
- Location: England
Ibara issues
In the words of an alcholic, have another drink!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
The video signal from all pcb's consist (amongst other thing) of three colors.
Red
Green
Blue
This is known as RGB.
Seems like you are not getting the Red and Green signals true to get all colors.
Check for the JAMMA harnes connector and where the connector connects on the board. Gently clean it. But be careful.
Gently
My guess is it is porbably working allready, or the pcb is broke.
Or the Harness has some loose contacts.
to know for sure is to try it on another cab/supergun.
Good luck.
If you already tried these tips, I'm sorry to have offende your knowledge.
Red
Green
Blue
This is known as RGB.
Seems like you are not getting the Red and Green signals true to get all colors.
Check for the JAMMA harnes connector and where the connector connects on the board. Gently clean it. But be careful.
Gently
My guess is it is porbably working allready, or the pcb is broke.
Or the Harness has some loose contacts.
to know for sure is to try it on another cab/supergun.
Good luck.
If you already tried these tips, I'm sorry to have offende your knowledge.