shmups.system11.org

Shmups Forum
 
* FAQ    * Search
 * Register  * Login 
It is currently Fri May 25, 2018 6:55 am View unanswered posts
View active topics



Post new topic Reply to topic  [ 94 posts ]  Go to page Previous  1, 2, 3, 4
Author Message
 Post subject: Re: AV-DRIVER: Universal RGB A/V Amplifier - Ideal for PCE/T
PostPosted: Mon May 14, 2018 9:56 am 


User avatar

Joined: 20 Sep 2008
Posts: 304
Location: Ioannina , Greece
Sorry to bump this thread but since there is no white PCE info yet on the AV-Driver page I need your expertise :)
Do these settings look correct for a white JP PCE console?

Image

also am I correct to assume that the scart cable connections are straight cables without any passives in the scart socket?

Thanks in advance for any info/help! :mrgreen:


Top
 Offline Profile  
 
 Post subject: Re: AV-DRIVER: Universal RGB A/V Amplifier - Ideal for PCE/T
PostPosted: Mon May 14, 2018 1:39 pm 



Joined: 21 Aug 2016
Posts: 159
The PCE should be the same settings as the TG16, AFAIK. It's all the same chips, just a different box. I made a video a little while back on how to install it, including all the correct settings to used based on the web research I had done: https://www.youtube.com/watch?v=zagazNB5i9c. I don't remember the settings off the top of my head, but I don't believe you want any attenuation of the video lines, just gain.

In regards to the cable, yes, just get straight wires, no resistors or capacitors. I've also got a link in the description of the video for the cable I used, though, if you're using a different connector, you may need something else. Retro Access can remove components from any cables you order, though.


Top
 Offline Profile  
 
 Post subject: Re: AV-DRIVER: Universal RGB A/V Amplifier - Ideal for PCE/T
PostPosted: Mon May 14, 2018 7:31 pm 


User avatar

Joined: 20 Sep 2008
Posts: 304
Location: Ioannina , Greece
thanks for the info thebigcheese , will go by your video :D
I already have my cable/connector, will modify it and remove any components used it's not an issue :mrgreen:


Top
 Offline Profile  
 
 Post subject: Re: AV-DRIVER: Universal RGB A/V Amplifier - Ideal for PCE/T
PostPosted: Mon May 14, 2018 7:35 pm 



Joined: 21 Aug 2016
Posts: 159
Actually this brings up a good point. Tim, if you're around, do all four channels need to be set the same even though only three of them are actually used? On mine, I've only set the jumpers on three of the channels. Haven't had any issues so far, but just want to make sure. I'm also putting a write-up on my wiki, don't want to be giving out bad info.


Top
 Offline Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 94 posts ]  Go to page Previous  1, 2, 3, 4

All times are UTC


Who is online

Users browsing this forum: YaCy [Bot] and 14 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Space Pilot 3K template by Jakob Persson
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group