Dodonpachi DOJ PCB fan

Trevor spencer · Post by **Trevor spencer** » Mon Jul 25, 2005 2:03 pm

i got myself one of these PCBs in the end

but the fans not working can anyone tell me where i can get a replacment ? also is the operational start up 5v for this fan ?

Trevor spencer · Post by **Trevor spencer** » Mon Jul 25, 2005 7:48 pm

right took it apart now and i have some info its a SUNON fan heres the specs:

Size (mm) :60x60x15

Model : KD1206PHB2

Volt. 12VDC

WATTS 1.9w

when i find a place to buy ill post a link

Valgar · Post by **Valgar** » Mon Jul 25, 2005 8:02 pm

Good info to know. Thanks

Trevor spencer · Post by **Trevor spencer** » Mon Jul 25, 2005 8:15 pm

well found this but i dont think i can order form here

http://216.239.37.104/translate_c?hl=en ... D%26sa%3DG

heres sunons main page ill contact them see what they say

http://www.sunon.com/english/no.htm

japtor · Post by **japtor** » Tue Jul 26, 2005 4:15 am

tried looking for similar specced/sized regular pc case fans?

sikraiken · Post by **sikraiken** » Thu Jul 28, 2005 12:15 am

The only thing I could find was a KDE1206PHB2, it looks exactly the same, and I looked through all the documentation they have on their site and couldn't find anything about the KD1206PHB2, so maybe it's an older model? I thought maybe you just typed it wrong, but I looked at the picture on that korean site and even the picture has the same model number, so I don't know. The KDE is just the "series" of the fan, so I don't think it really should matter, as long as everything else is the same (and it is).

http://cgi.ebay.com/SUNON-60x15mm-High- ... dZViewItem

The ebay auction has bare leads, so I'm not sure if you'd want that.

You can buy it directly from their site if you don't do ebay, but it's a bit more expensive. You can have it so it does have leads (or choose bare leads), and you can pick the type you need (2 or 3 pin female, or 4 pin male, not sure which one you need).

http://www.thermalfx.com/merchant2/merc ... DE1206PHB2

This site also sells it with a 3pin tx3 connector, maybe it would be cheaper after you add shipping?

http://www.jab-tech.com/customer/produc ... uctid=2946