Shmups Forum
* FAQ    * Search
 * Register  * Login 
It is currently Sat Aug 19, 2017 3:21 am View unanswered posts
View active topics

Post new topic Reply to topic  [ 1 post ] 
Author Message
 Post subject: PAL GameCube RGB + Bandridge 7725 = Rolling Diagonal Bars
PostPosted: Sat Aug 12, 2017 3:56 pm 

Joined: 12 Aug 2017
Posts: 1
Hi all,

I have a PAL GameCube hooked up over SCART RGB. When I connect it directly to my TV, all is good. When I connect it through my Bandridge 7725 passive SCART switcher I get rolling diagonal lines, mostly on bright colors, especially red. The switch seems to work fine otherwise, i.e. my N64 & Saturn don't show the slightest problems and I also did the mod to fix the power issues on the 5th input.

I was using a cheap SCART RGB cable and upgraded to a higher quality one from This improved the situation a but, but didn't fix it either. I noticed that turning up the noise reduction in my TV's picture settings to Med/High nearly completely eliminates the artifact.

Not sure what to do here. The GC and Bandridge work absolutely fine with all other devices, just not in combination. I suspect this is a sync issue and my TV has a filtering feature that fixes it 90%. No GC outputs CSYNC and the PAL GC I'm using has no S-Video, so Sync-on-Luma is not an option either. Naturally, I'm using a composite sync cable. The only upgrade I can think of is to use an external sync stripper or cable, not sure if that'll help.

Any ideas?


 Offline Profile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC

Who is online

Users browsing this forum: axlblazeadam, doonut, ReSe2k and 13 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Space Pilot 3K template by Jakob Persson
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group